Number of views:
Number of views:
Product serial number
Back to list
Anti-collision pads are also called anti-collision blocks, cushions, and rubber blocks. The anti-collision pad is mainly installed on the edge of the loading and unloading platform, which is convenient for the truck to park and reduce the driver's parking difficulty. The cushion cushion protects the cargo platform, cargo handling equipment and the truck from damage.
The design of the anti-collision pad should mainly consider the following factors:
Because the anti-collision pad is exposed to the outside environment, its material must meet the requirements of high and low temperature resistance, corrosion resistance and so on.
The anti-collision pad should be designed so that no debris will fly out during the collision. After the front and side collision tests, the debris generated by the anti-collision pad should be retained in the anti-collision pad, and it must not damage the collision vehicle, pedestrians and other vehicles .
After the vehicle collides with the crash pad, the driver's acceleration should be less than 12g, and the average acceleration of the last 10ms should be less than 20g, and after the runaway vehicle hits the crash pad, the vehicle cannot cross the crash pad; nor can it bounce back into the adjacent Drive in the lane to avoid collision with the following car and a secondary accident.
The height of the anti-collision pad is not easy to be too high or too short; too high to easily block the driver's sight; too short, the vehicle is easy to climb on the anti-collision pad. Therefore, a certain safety buffer distance should be set between the anti-collision pad and the protected obstacle, generally about 60cm.
European standard EN1317-3 for crash pads.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table